45° SAE 316 SS Loctite Coated Marine

Zoom Out
Zoom In

More Views

Default Category

45° SAE 316 SS Loctite Coated Marine

Sku: ft-seal-45-316-sgr Product Number: 45FT-XX-316-SGR

Part Numbers: 45-XX-316-SGR (XX = Seal Size)



  • 316 Stainless steel seal with Loctite Vibra Seal coating for Nickel plated and 316 SS fittings.

  • Rated for -40 to 300 F temperature and all common gases & fluids.

  • Available in SAE (US Standard), 45 degree flare, for inch tubing sizes.

  • Also available in JIC (US Standard), 37 degree flare (special order only), for inch tubing sizes.


The Flaretite seal is sold in the following pack types:



  • Blister Pack

  • Kraft Box

  • Bulk Pail


Note: The number of Flaretite seals per pack type varies according to the size of seal.


See overview section for quantities per pack.


Availability: In stock

Price: $0.00

* Required Fields

Price: $0.00

Part Numbers: 45-XX-316-SGR (XX = Seal Size)



  • 316 Stainless steel seal with Loctite Vibra Seal coating for Nickel plated and 316 SS fittings.

  • Rated for -40 to 300 F temperature and all common gases & fluids.

  • Available in SAE (US Standard), 45 degree flare, for inch tubing sizes.

  • Also available in JIC (US Standard), 37 degree flare (special order only), for inch tubing sizes.


The Flaretite seal is sold in the following pack types:



  • Blister Pack

  • Kraft Box

  • Bulk Pail


Bulk Pail Note: The number of Flaretite seals per pack type varies according to the size of seal.


Quantities:



  • Blister Pack


    • Seal size 03 to 08 contain 10 seals

    • Seal size 14 to 20 contain 5 seals

    • Seal size greater than 20 contain 2 seals


  • Kraft Box


    • Seal size 03 to 12 contain 100 seals

    • Seal size 10 to 20 contain 50 seals

    • Seal size greater than 20 contain 25 seals


  • Bulk Pail


    • Seal size 03 to 06 contain 5000 seals

    • Seal size 08 contain 4500 seals

    • Seal size 10 contain 3500 seals

    • Seal size 12 contain 2500 seals

    • Seal size 14 contain 1500 seals

    • Seal size 16 contain 1000 seals

    • Seal size 20 contain 750 seals

    • Seal size 24 contain 650 seals

    • Seal size 32 contain 400 seals


The entire seal is coated with a dry-to-the-touch, baked-on Loctite™ sealant. When inserted into a fitting, the concentric rings form multiple seals down the face of the flare, while the Loctite coating fills minor imperfections, dramatically increasing the integrity of the fitting. New ISO and NFPA standards strongly recommend seals for all fittings. The sealing rings prevent environmental debris and aggressive cleaning solvents from attacking the sealing face while the Loctite™ protects the face from fretting, galling and over-tightening. And unlike ORFS fittings, the Flaretite Seal will not fail during a fire, allowing atomized hydraulic oil to fuel the fire.



  • Fits all standard JIC flare fittings, hydraulic and pneumatic!

  • Protects against weeping on new and damaged fittings!

  • Creates a perfect "Leak-Free" clip-on seal, Guaranteed!

  • Complies with the latest International standards!


Independently tested by Eaton’s Aeroquip hose & fittings division to one million high pressure square wave pulse cycles on badly scored JIC flared fitting faces without failure, this design, which easily installs by simply clipping over the male flare section, makes Flaretite Seals the single best choice “compliant seal” flared type fitting permanent leak free fix. Having proven performance with some of the world’s most difficult to seal flared fitting applications.


Manufacture of Flaretite Seals is based in Flaretite’s head office in Fenton North America.


Eaton Master Catalog M21. PATENT NO: US D447222 S, JP 1098620